(318) 687-9224

Products

What is EcoGrid?
EcoGrid is a tough, durable, interlocking grid system designed to provide turf protection, ground reinforcement and erosion control. It comes pre-assembled in lightweight 14.31ft2 (1.33m2) pieces for easy handling and installation.

Manufactured from 100% recycled plastics and providing superior water drainage, this revolutionary system provides an economical and environmentally sustainable alternative to asphalt, concrete or paving.

Where is EcoGrid used?
EcoGrid can be used as either a temporary or permanent ground reinforcement. It is used to reinforce lawns and other grassy areas to prevent mud and damage to the ground. Once laid ecogrid can be filled with stone, earth or seeded. When the grass has grown EcoGrid becomes invisible but still resists wear and compression.

Ecogrid is perfectly suited to pathways, parking lots or driveways and has numerous sporting applications such as equestrian facilities and golf courses. EcoGrid is provides excellent ground support and prevention from erosion.

Why use EcoGrid?
Unbeatable Benefits:

  • Environmentally Friendly - ecological, ground water neutral
  • Superior water drainage, no more mud or puddles
  • Prevents erosion and wear on pathways
  • Strengthens grassed areas to prevent mud and damage
  • Contains gravel drives and keeps them rut-free
  • Creates a natural surface suitable for high traffic and heavy vehicles
  • Easily concealed with gravel or grass
  • Resistant to water, chemicals, corrosion, cracking
  • A 'fit-and-forget' product


Features you can rely on:

  • Easy to install
  • Extremely lightweight (approx 2lb/ft2 (10.5kg/m2))
  • Comes pre-assembled in easy to use 14.31ft2 pieces (1.33m2)
  • High Strength (up to 32.5t/ft2 (350t/m2))
  • Manufactured from 100% Recycled Plastics
  • Patented tab interlocking system
  • Virtually Maintenance-free, tough and durable
  • Temporary or permanent ground protection
  • Car park markings can be inserted

Products

Suggested Use
EcoGrid el30
(30mm wall height)		 Moderate Vehicle Traffic, Paddocks, Green Spaces, Walkways, Playgrounds
EcoGrid e50
(50mm wall height)		 Heavy Vehicle Traffic, Parking Areas, Driveways, Roadways and Shoulders, Riding Arenas
EcoGrid s50
(50mm wall height)		 Slope Stabilization, Reduced Load Capacities
EcoGrid e40
(40mm wall height)		 Helipads, Airstrip Reinforcements, Military Applications
EcoGrid x30
(30mm wall height)		 Green Roofs, Technical Applications

Available Colors
  • Black
  • Green
  • Brown

Pricing
Gridworks SBC, LLC is committed to passing on all possible savings to our clients, thus we provide customized quotes on a project basis. No project is too big or too small. Call
(318) 869-2177 or email us today to obtain your customized quote.

EcoGrid el30EcoGrid el30
Reliable ground reinforcement solution.
The EL30 can help you control your mud problems forever by reinforcing your pathways, paddings and access areas. It is suitable for all moderate traffic, ground reinforcement needs and is extremely lightweight and easy to install.


Suggested Applications
  • Moderate vehicular traffic
  • Paddocks
  • Green spaces
  • Walkways
  • Playgrounds
  • Dog Kennels
  • Paths and drives
  • Carports
  • Access areas
  • Campsites
  • Wood and storage areas
  • Container depots
  • Flat silos
  • Market gardening
  • Roof greening
Technical Data for the EcoGrid el30
Order code el30
Dimensions 33cm x 33cm x 3cm
Wall thickness 4mm
Wall height 30mm
Weight per unit 0.575kg
Weight per m2 5.175kg
Material 100 % recycling material PE (polyethylene)
Compression strength up to 20 tons axle load in accordance with DIN 1072
Carrying load per m2 up to 120 tons
Dimensional stability temperature range -50° to 90° C
Dimensional change 0.5% (for a normal temperature +20° to 80° C
Absorption of humidity 0.01%
Environmental compatibility Environmentally neutral in accordance with DIN 38412 UV and frost resistant
Solubility Resistant to acids, alkalis, alcohol, oil and petrol (de-icing salt, ammonia, acid rain, etc.)
Laying performance 100 m2 per person and hour

TÜV-Nord Certifications
Durability: Unrestricted in accordance with TÜV certification
Load: Up to 20 tons axle load in accordance with DIN 1072
Environmental compatibility: Environmentally neutral in accordance with DIN 38412
Tested in accordance with:
  • DIN 1072 roads and bridges
  • DIN EN ISO 124 (B125) requirements for surfaces for car parking areas
  • DIN 38412

    • Not sure what product to use? Contact Gridworks now and our expert staff will provide you with all the advice you need.
                                                                                                                                        Back to Top
    _______________________________________________________________________________

    EcoGrid e50EcoGrid e50
    Suitable for all heavy duty ground reinforcement applications.
    Even with the increased strength, the e50 is still lightweight and easy to install. No project is too big for the e50, from residential driveways to commercial carparks.

    Ecogrid e50, the economical and environmentally sustainable alternative to :

    • Asphalt & Concrete - requires ongoing maintenance to repair potholes, is not environmentally friendly.
    • Paving - settles and becomes unlevel.
    • Gravel - ruts, erodes and washes away.
    Suggested Applications

    • Parking areas
    • Driveways
    • Riding arenas
    • Fire service access
    • Raised verge reinforcement
    • Connecting paths, drives
    • Building site routes, loading areas
    • Gardening and landscaping
    • Slope and dike reinforcements
    • Helipads
    • Airstrip reinforcements
    • Industrial and commercial applications
    • Military applications
    Technical Data for the EcoGrid e50

    Order code e50
    Dimensions 33cm x 33cm x 5cm
    Wall thickness 5mm
    Wall height 50mm
    Weight per unit 1.213kg
    Weight per m2 10.917kg
    Compression strength up to 20 tons axle load in accordance with DIN 1072
    Carrying load per m2 up to 350 tons
    Dimensional stability temperature range -50° to 90° C
    Dimensional change 0.5% (for a normal temperature +20° to 80° C
    Absorption of humidity 0.01%
    Environmental compatibility Environmentally neutral in accordance with DIN 38412 UV and frost resistant
    Solubility Resistant to acids, alkalis, alcohol, oil and petrol (de-icing salt, ammonia, acid rain, etc.)
    Laying performance 100 m2 per person and hour

    TÜV-Nord Certifications
    Durability: Unrestricted in accordance with TÜV certification
    Load: Up to 20 tons axle load in accordance with DIN 1072
    Environmental compatibility: Environmentally neutral in accordance with DIN 38412
    Tested in accordance with:
  • DIN 1072 roads and bridges
  • DIN EN ISO 124 (B125) requirements for surfaces for car parking areas
  • DIN 38412

    • Not sure what product to use? Contact Gridworks now and our expert staff will provide you with all the advice you need.
                                                                                                                                        Back to Top
    ___________________________________________________________________________________________

    EcoGrid s50EcoGrid s50
    Co    mplete erosion control and slope stabilization
    Protect against erosion with the EcoGrid s50, the ultimate in reinforcing and stabilizing slopes. The thinner wall design, along with the unique grid structure and weatherproof composition, enables the s50 to hold more fill, stabilizing the slope.

    Slope stabilization
    Suggested Applications

    • Garage drives and carports
    • Fire service access
    • Gardening and landscaping
    • Bank and river bed reinforcements
    • Slope and dike reinforcements
    • Golf course paths
    • Lawn greening
    Technical Data for the EcoGrid s50

    Order code s50
    Dimensions 33cm x 33cm x 5cm
    Wall thickness 2.5mm
    Wall height 50mm
    Weight per unit 0.760kg
    Weight per m2 6.84kg
    Material 100% recycling material PE (polyethylene)
    Compression strength up to 20 tons axle load in accordance with DIN 1072
    Carrying load per m2 up to 120 tons
    Dimensional stability temperature range -50° to 90° C
    Dimensional change 0.5% (for a normal temperature +20° to 80° C
    Absorption of humidity 0.01%
    Environmental compatibility Environmentally neutral in accordance with DIN 38412 UV and frost resistant
    Solubility Resistant to acids, alkalis, alcohol, oil and petrol (de-icing salt, ammonia, acid rain etc.)
    Laying performance 100 m2 per person and hour

    TÜV-Nord Certifications
    Durability: Unrestricted in accordance with TÜV certification
    Load: Up to 20 tons axle load in accordance with DIN 1072
    Environmental compatibility: Environmentally neutral in accordance with DIN 38412
    Tested in accordance with:
  • DIN 1072 roads and bridges
  • DIN EN ISO 124 (B125) requirements for surfaces for car parking areas
  • DIN 38412 

    • Not sure what product to use? Contact Gridworks now and our expert staff will provide you with all the advice you need.
                                                                                                                                        Back to Top
    ___________________________________________________________________________________________

    EcoGrid e40EcoGrid e40

    Suggested Applications

    • Car park reinforcement
    • Outdoor riding rings
    • Fire service access
    • Raised verge reinforcement
    • Connecting paths, drives
    • Building site routes, loading bays
    • Gardening and landscaping
    • Slope and dike reinforcements
    • Helipads
    • Airstrip reinforcements
    • Industrial and commercial applications
    • Military applications
    Technical Data for the EcoGrid e40

    Order code e40
    Dimensions 33cm x 33cm x 4cm
    Wall thickness 3.6mm
    Wall height 40mm
    Weight per unit 0.580kg
    Weight per m2 5.22kg
    Material 100 % recycling material PE (polyethylene)
    Compression strength up to 20 tons axle load in accordance with DIN 1072
    Carrying load per m2 up to 120 tons
    Dimensional stability temperature range -50° to 90° C
    Dimensional change 0.5% (for a normal temperature +20° to 80° C
    Absorption of humidity 0.01%
    Environmental compatibility Environmentally neutral in accordance with DIN 38412 UV and frost resistant
    Solubility Resistant to acids, alkalis, alcohol, oil and petrol (de-icing salt, ammonia, acid rain etc.)
    Laying performance 100 m2 per person and hour

    TÜV-Nord Certifications
    Durability: Unrestricted in accordance with TÜV certification
    Load: Up to 20 tonnes axle load in accordance with DIN 1072
    Environmental compatibility: Environmentally neutral in accordance with DIN 38412
    Tested in accordance with:
  • DIN 1072 roads and bridges
  • DIN EN ISO 124 (B125) requirements for surfaces for car parking areas
  • DIN 38412

    • Not sure what product to use? Contact Gridworks now and our expert staff will provide you with all the advice you need.
                                                                                                                                        Back to Top
    ___________________________________________________________________________________________

    EcoGrid x30EcoGrid x30
    Ultimate green roofing solution
    The EcoGrid x30 is ideal in the application of green roofing. Lightweight and easy to install the x30 is also suitable for technical applications such as machine rooms.

    Suggested Applications
  • Green Roofs
  • Technical Applications (Machine Rooms)

    • Technical Data for the EcoGrid x30

    Order code x30
    Dimensions 33cm x 33cm x 3cm
    Wall thickness 5mm
    Wall height 30mm
    Weight per unit 0.770kg
    Weight per m2 6.93kg
    Material 100 % recycling material PE (polyethylene)
    Compression strength up to 20 tons axle load in accordance with DIN 1072
    Carrying load per m2 up to 150 tons
    Dimensional stability temperature range -50° to 90° C
    Dimensional change 0.5% (for a normal temperature +20° to 80° C
    Absorption of humidity 0.01%
    Environmental compatibility Environmentally neutral in accordance with DIN 38412 UV and frost resistant
    Solubility Resistant to acids, alkalis, alcohol, oil and petrol (de-icing salt, ammonia, acid rain etc.)
    Laying performance 100 m2 per person and hour

    TÜV-Nord Certifications
    Durability: Unrestricted in accordance with TÜV certification
    Load: Up to 20 tons axle load in accordance with DIN 1072
    Environmental compatibility: Environmentally neutral in accordance with DIN 38412
    Tested in accordance with:
  • DIN 1072 roads and bridges
  • DIN EN ISO 124 (B125) requirements for surfaces for car parking areas
  • DIN 38412

    • Not sure what product to use? Contact Gridworks now and our expert staff will provide you with all the advice you need.
                                                                                                                                        Back to Top

     

    Call (318) 687-9224 or email us today!